Archive
- March 2024 (1)
- February 2024 (2)
- January 2024 (1)
- November 2023 (1)
- July 2023 (1)
- May 2023 (1)
- February 2023 (1)
- June 2021 (2)
- April 2021 (2)
- February 2021 (2)
- January 2021 (6)
- October 2020 (4)
- September 2020 (3)
- August 2020 (6)
- July 2020 (5)
- June 2020 (4)
- May 2020 (6)
- April 2020 (7)
- March 2020 (5)
- February 2020 (5)
- January 2020 (5)
- December 2019 (5)
- November 2019 (6)
- October 2019 (5)
- September 2019 (1)
- March 2018 (10)
- February 2018 (7)
- January 2018 (10)
- December 2017 (7)
- November 2017 (7)
- October 2017 (10)
- September 2017 (8)
- August 2017 (10)
- July 2017 (8)
- June 2017 (9)
- May 2017 (13)
- April 2017 (10)
- March 2017 (10)
- February 2017 (10)
- January 2017 (11)
- December 2016 (12)
- November 2016 (16)
- October 2016 (15)
- September 2016 (5)
- August 2016 (17)
- July 2016 (15)
- June 2016 (16)
- May 2016 (19)
- April 2016 (12)
- March 2016 (20)
- February 2016 (17)
- January 2016 (21)
- December 2015 (20)
- November 2015 (7)
- October 2015 (1)
- September 2015 (1)
- July 2015 (7)
- June 2015 (2)
- May 2015 (1)
- April 2015 (1)
Close
Archive
- March 2024 (1)
- February 2024 (2)
- January 2024 (1)
- November 2023 (1)
- July 2023 (1)
- May 2023 (1)
- February 2023 (1)
- June 2021 (2)
- April 2021 (2)
- February 2021 (2)
- January 2021 (6)
- October 2020 (4)
- September 2020 (3)
- August 2020 (6)
- July 2020 (5)
- June 2020 (4)
- May 2020 (6)
- April 2020 (7)
- March 2020 (5)
- February 2020 (5)
- January 2020 (5)
- December 2019 (5)
- November 2019 (6)
- October 2019 (5)
- September 2019 (1)
- March 2018 (10)
- February 2018 (7)
- January 2018 (10)
- December 2017 (7)
- November 2017 (7)
- October 2017 (10)
- September 2017 (8)
- August 2017 (10)
- July 2017 (8)
- June 2017 (9)
- May 2017 (13)
- April 2017 (10)
- March 2017 (10)
- February 2017 (10)
- January 2017 (11)
- December 2016 (12)
- November 2016 (16)
- October 2016 (15)
- September 2016 (5)
- August 2016 (17)
- July 2016 (15)
- June 2016 (16)
- May 2016 (19)
- April 2016 (12)
- March 2016 (20)
- February 2016 (17)
- January 2016 (21)
- December 2015 (20)
- November 2015 (7)
- October 2015 (1)
- September 2015 (1)
- July 2015 (7)
- June 2015 (2)
- May 2015 (1)
- April 2015 (1)
Back to Blog List
Topics/Previous Posts
Back to Blog List
How To Create a Thankful Magnetic List
Hello, everyone!! Kymona here with another project for Thanksgiving!! This time around, I’m going to show you how to create a sign using the Magnetic Sheets.
For this project, I wanted to create a sign that my family could actively participate in creating. As they enter the kitchen, they will write down what they are thankful for. This would give everyone a chance to read what everyone is thankful for.
Take a look at my project:
Here is how I created these signs:
1. I gather all of the supplies I needed!
2. Then I cut the magnetic sheet down to size. I simple used my basic paper trimmer, and it cut with ease.
3. Then I added adhesive to the back of the paper and attached it to the magnetic sheet.
Super easy to create. It takes less than 5 minutes to get both of these signs up on the fridge.
Totally magnetic, check it out:
When the holiday is over, I will add this list to my scrapbook and pull it out the following year to compare what we were all thankful for! It will be good to see if things change for us year to year.
What do you think? Would you give this a try? Please let me know below. If you have any questions, please leave them below as well.
Thank you so much for stopping by, I hope you were inspired here today.